In tooth form secure firmly on leather belt annulus bar board

  • Time:
  • Click:163
  • source:PERFSO CNC Machining
Make industrial yarn, fibre glass and the winding of the belt that pack and worry the company that waits for equipment -- Dietze&Schell company, one kind is being searched to be able to be in all the time since a long time tooth form leather belt annulus go up to be secured firmly bar board machine. Because this kind of equipment does not have manufacturer to be able to be offerred already, also did not find corresponding patent, be necessary to he is designed and make a such machine so. In a lot of departments that machinery creates, the drive of rotating equipment uses device of tooth form belt-conveyor to create a department in a lot of machinery mostly, use device of tooth form belt-conveyor to come mostly the equipment with rotational drive. On belt-conveyor device, leather belt annulus should provide the tooth form that at least must one participates in transmission bar board (graph 1) . Bar board undertake directing to leather belt on the rotational working face of wheel. Because the machine is in the great majority of the user to move quickly, the part is cannot in inactive production process, accordingly, the skin of a come away contains the consequence that may make cause disaster difficult sex. On one hand, actuating device can quit movement, cause stop production from this; On the other hand, the leather belt of come away bars with what come down flabbily board may bring more harm to the machine. Graph 1 go up in belt-conveyor device, leather belt annulus should provide the tooth form that at least one participates in transmission bar board at present, dietze&Schell company shows some in tooth form using secure on leather belt annulus bar board the machine often cannot make full use of. As a result of the limitation of its structure means, can use inside narrow range only. This is the machine that has used a lot of years what him factory makes. Use this machine in tooth form secure on leather belt annulus bar board, sometimes not very successful, bar below very small negative charge board can go up from wheel come away. In addition, not be leather belt annulus can be in all this company tooth form machine on this machine. Some leather belt annulus too big, as a result cannot achieve workpiece to need the place of treatment at the machine. As a result of above these reasons, belt bar board tooth form leather belt annulus about 95% make by others. But, often also can appear on the wheel that buys outside these bar board cannot secure the circumstance on wheel firmly. Can conclude from this, the supplier also masters this engineering technology without 100% ground, the result often is the incur loss through delay that must undertake complementing machining or causes installation to go up. Must redesign a machine accordingly, this production that is located in Coburg is industrial yarn, fibre glass and the winding of the belt that pack and worry the Dietze&Schell company that waits for equipment, one is being searched to be able to be in all the time since a long time tooth form leather belt annulus go up to be secured firmly bar board machine. But this kind of equipment can be offerred without manufacturer already, also did not find corresponding patent. So special be necessary to he is designed and make a such machine. Leather belt of production tooth form annulus 3 kinds of data that should use normally are: Nirosta stainless steel - X14CrMoS17-1.

4104, easy cutting steel - 9SMn28K1.

0715, aluminous - AlCuMg PbF38-3.

1645. These are easy cutting alloy, undertake without an other place cutting is machined very easily, very comfortable at making turning and milling. To have a test, made the simple tooth form that do not have tine appearance of leather belt annulus, so that determine craft parameter (roll drum rate, press deepness, scroll, public errand) , adjust parameter (pressure) , retentivity (clip holds power) with cutting tool (mould) geometrical appearance. Will bar board with tooth form the technique of joint of leather belt annulus is to use the pressure take shape that rolls drum to work continuously, with the tool of double taper makes workpiece local be out of shape, elbow out material radially outwards. Bar board the effect that has a tool set coming back, close with the material appearance of wheel the ground joins together (graph 2) , and itself very acutely is out of shape for taper. The extruding that carries awl state is out of shape produced very big retentivity, it is prevented bar board from tooth form come away of leather belt annulus. Graph 2 show like sectional plan institute, bar board the effect that has a tool set coming back, the material appearance of it and wheel closes the ground joins together, and itself acutely produces awl record be out of shape in experimenting, can see, if bar board have larger installation space, can get firm connection, this meeting makes bar board it is more easy to insert. The tool of use interaction achieves the new machine that uniformity shows 3 times like the graph to be like next character: ● has the tool of two symmetrical interaction, use at the balance of inhomogenous sex. They can undertake modulatory mixing through gearing of a worm jointly apply the brake; The wheel of the rolls drum to be used at machining all likelihoods to appear geometry appearance of ● float bearing; What ● rolls drum is optimal model the flow that the face can improve data; The structure with very rigid ● ; ● combined-type adapter is placed with the outfit at workpiece (it is OK that the hub of many different diameters uses an adapter only to the heart) ; Process can use ● programme controll. Air cylinder squashs the beam that contains a tool to go up to workpiece. Workpiece is boiling as driving moment turn below drum, make material is out of shape, form a firm link. The machine that the graph shows 3 times is used at semi-automatic turn an operation. Undertake controlling through a program, all functions of the machine are OK undertake controlling on work station, the data that can process the task to need inputs menu, can revise treatment parameter. In the operation of automation, use modulatory parameter treatment to bar board. Graph 3 bar board compressor is to be semi-automatic the process capability of following machines passed the craft achievement of the operate and designs new machine that turn to get a proof to the treatment of all sorts of different workpiece. From the graph 2 in can see, bar board with tooth form although the combination of leather belt annulus still can form a solid whole after curiuming. On new machine, all current now data make bar board with tooth form leather belt annulus closes through appearance and firm join is together, although bar board have relative to larger installation clearance also is such. This makes bar board it is easier to insert. Of the tool fixed position of the automation that rolls drum as a result of two and the adapter that do not have a tool change, equipment settling time is very short. The tool of use elaborate design, although very great work also can machine displacement. New machine improved the economy of this production branch. CNC Milling